Wednesday, March 7, 2012

IKEA Lack table Rehashed

A few weeks ago I was browsing through some really creative repurposed IKEA products on Ikeahackers.net. Being an IKEA hacker myself, I was inspired to submit my repurposed Lack side table. I waited, and waited, and waited for my hack to be posted but it never showed up, that is until yesterday.

A more recent picture of the table




Some readers left comments and questions about the table which I thought I could respond to here. I want to preface by saying I wish I had done a better job documenting the process but at the time (over a year ago) I was new to DIY blogging, thus clueless about explaning and photographing the step by step process.


The table before the makeover
I owned two very old Lack side tables that desperately needed to be replaced. I had seen a few high-end tables with a wood top and metal frame and wanted something similar. Unfortunately for me I couldn’t find a similar look at more affordable price so I decided to repurpose the top of the Lack tables. The legs unscrewed easily so I already had the first component - the wood table top.


My assistants removing the leg screws

As for the metal frame it had to be outsourced as I obviously didnt have the tools to build it. For its design I went for an ‘x’-shaped base in the bottom (I didnt want an exact duplicate of Crate & Barrel's tables). So 'x' bottom, and a square at the top to support the wood top and to distribute any weight that might go on top of the table.




Metal formed in a square at the top to support the wood top.

I found a metal/welding shop and showed them my sketches which unfortunately I never got back from them so I cant share it with you (lesson learned). The owner showed me some leftover scraps of metal in different sizes, I picked the thinnest square tubes (about 1cm thick) because I wanted the table to have a light and airy look. I asked for the frame to be painted in black semi-gloss. I also gave him the Lack top so he could affix it to the frame.

Nothing complicated here, screws keep the top in place

Total damage was around $50-60 which compared to the designer tables is a steal, but for that price I feel like the quality was compromised. In what sense?



ALL the welded joints were left ungrinded.

Well they failed to grind/sand the welded joints, its uneven and noticeable from up close. I think if the frame hadn’t been painted black it would've been more obvious. The frames are not a true 90 degree angle, from some sides its easy to see that one or two of the vertical supports are leaning further in that the others. These two issues aside am pretty happy with the results, obviously it was a matter of paying a bit more and finding a more skilled welder. Do you think it's reasonably priced?


1-2 metal legs aren't at a true 90 degree angle

Without any metal cutting and welding equipment this project is not doable on your own. If I had to make it with readily available materials I might use pre-cut square pcs of wood available at any large hardware store, saw the corners, glue them together and leave it clamped for about a week. The Lack tabletop is not at all heavy so just make sure you buy thick enough square wood strips to support the structure above. If you do go that route let me know how that works out for you!!!





If you want to read previous posts about this table click below:

This where I found design inspiration.
And this was what came out of it.

25 comments:

  1. I have one of these and I've been wondering what to do with it! This is one of the best hacks I've seen. I just submitted one myself today!

    Great site. So glad I found you.

    ReplyDelete
    Replies
    1. THANKS! I just checked out your blog, was it the Rast hack you submitted? I love the handles you installed. I'll be keeping an eye out for your reveal.

      I have 2 Rasts waiting to be transformed to night stands. I just cant decide how I want it to look. How long did yours take to do? Did you do any sanding between coats?

      Am also WOWed by your lamp project. Dont you love jute, there is so much you can do with it. I made Pottery Barn inspired jute curtain tie-backs for my sons room (thats a mouthful for ya):

      http://simplynamoured.blogspot.com/2012/03/room-tour-noahs-room.html

      Delete
  2. Thanks for discussing the problems so your readers can give clear instructions to the welders. Specifications and scope of work are so important.

    ReplyDelete
  3. Hello, I truly enjoyed reading your post. I wanted to thank you for this great post!!!
    Table Leg

    ReplyDelete
  4. I love ikea items!
    this table looks beautiful and its color is wonderful

    https://www.urbansales.co.nz/

    ReplyDelete
  5. Its a wonderful post and very helpful, thanks for all this information. You are including better information regarding this topic in an effective way.Thank you so much
    Bordsben Metall

    ReplyDelete
  6. This article is so informative. It really incited interest in me on many points. I agree with much of your views here. Your material has ignited my brain into thinking harder. Thank you so much.
    ikea wood table

    ReplyDelete

Would love to hear your thoughts!

Related Posts Plugin for WordPress, Blogger...